MODEL PROFILE

Dishwasher / Bosch

SHE41CM2N

Find the official source for this exact appliance model.

Signal or code

Error codes and display signals

The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.

Model and error-code facts may be shown in the language of the original source.

Official PDF manual

Jump to manual pages

Open the official PDF at pages that document signals for this model.

MODEL OVERVIEW

About this model: Bosch SHE41CM2N

The Bosch SHE41CM2N is a 100 Series 24-inch dishwasher with front controls and a white finish, specified for 12 place settings at 48 dBA. Its listed programs include Heavy, Auto and Normal, with Sanitize and Extra Dry among the available options. Bosch lists PrecisionWash for washing and PureDry® for drying; Home Connect supports remote monitoring and control.

Where this exact model fits

SHE41CM2N belongs to Bosch’s 100 Series and is specified for 12 place settings with a 48 dBA sound rating. The visible white face and front-facing controls define how this particular SKU appears in the kitchen. Unlike a panel-ready model, this unit arrives with its own finished door. The capacity figure is a standardized place-setting measure; how comfortably larger cookware fits depends on the shape and arrangement of the real load. The sound figure identifies this listing rather than promising the same perceived noise in every room.

Bosch lists the appliance dimensions as 33 7/8 x 23 9/16 x 23 3/4 inches in height × width × depth and the required opening as 33 7/8″ x 24″ x 24″ inches. These are two different measurements. Check the actual cabinetry, finished floor and utility positions before using the cutout size for a replacement purchase. The cutout measurement is a planning figure, not a substitute for checking the installation diagram, hose routing and available space behind the unit. The product page also identifies a tub made of stainless steel; such details help distinguish close-looking Bosch SKUs.

Source for this detail · bosch-home.com

Programs, options and loading choices

The specification names these programs for SHE41CM2N: Heavy, Auto, Normal, Speed 60, Favorite. Bosch lists Remote Start, Sanitize, Extra Dry separately as options. That separation matters when comparing models: a program is the cycle selected for a load, while an option modifies an available cycle where the manual allows it. The named Speed 60 cycle gives this model a distinct short-cycle choice alongside the more conventional loads. Review the actual control labels before assuming every option can be combined with every program.

The listed washing system is PrecisionWash®. Bosch also reports 12 place settings, which describes a standardized load rather than an instruction to fill every rack to its limit. Leave room for spray-arm movement and follow the manual’s loading diagrams for tall utensils and mixed dishes. The Bosch specification separately lists Hand Wash, Energy Save, Half Load, Machine Care, Rinse as programs or options exclusive to Home Connect. Those are not the same as buttons guaranteed to appear on the appliance itself. If a function appears only in the app, its absence from the physical panel is not evidence of a fault.

Source for this detail · bosch-home.com

Remote selections and visible feedback

For SHE41CM2N, Bosch puts Hand Wash and Rinse in its list of choices exclusive to Home Connect, while Remote Start appears in the standard option list. A user should therefore look in the app for those named extras instead of expecting a matching physical button. The status hardware on this product sheet is the controls rather than a listed floor projection; an end-of-program audible indicator is also listed. App availability and a physical indicator answer different questions. If there is a warning, record the exact on-machine lamp pattern or displayed characters before applying the manual’s troubleshooting steps. Bosch pairs the PureDry® drying entry with a stainless steel tub on this exact page. The two fields describe different parts of the design. If the complaint is wet dishes, first identify the selected wash and drying option and the load arrangement; the material of the tub alone is not a diagnosis.

Source for this detail · bosch-home.com

Comparison with related Bosch listings

A second useful reference is SHE2ADF2N: Bosch lists it in the 100 Series at 12 place settings and 52 dBA, using PureDry® for drying. This model is a 100 Series listing with PureDry®. The two official sheets should be checked separately when assessing a replacement, because cabinet fit, controls and listed cycles may differ. This exact sheet additionally names Auto, which is absent from the comparison model’s listed programs. If that cycle matters, verify its control label for the precise SKU before selecting a replacement.

For a replacement plan, Bosch identifies SHE41CM2N as built under a counter with adjustable feet and a 78 3/4″ outlet hose. The toe kick is listed as black. Its white front is listed without a separate handle-design field, and the product page does not separately advertise an EasyGlide rack system. Bosch lists Hand Wash and Rinse among its Home Connect-only choices. The smaller-capacity configuration pairs Heavy with Normal; its tub is stainless steel, and its visible status comes through the control-panel display. Taken together, those fields give a more precise replacement match than the exterior finish alone.

Source for this detail · bosch-home.comSource for this detail · bosch-home.comSource for this detail · bosch-home.com

Verified model details

This description summarizes the linked source documents; check each cited source for your exact model and region.

Manufacturer source

Open official source

Official source linked

Bosch SHE41CM2N dishwasher product page and manuals

Open official source

If there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.

← Back to all models