AppliClue
ENESFRDE

MODEL PROFILE

Dishwasher / Bosch

SHV9PCM3N

Find the official source for this exact appliance model.

Signal or code

Error codes and display signals

The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.

E:20-60Error codeThe appliance detected limescale on the heating element.E:21-30Error codeDishware blocks the intake opening of the Zeolite container.E:30-00Error codeThe water protection system is active.E:31-00Error codeThe water protection system is active.E:32-00Error codeA water inlet problem: the supply valve may be closed or clogged, or the inlet hose may be blocked.E:34-00Error codeWater keeps entering the appliance.E:61-02Error codeThe drain pump cover is loose or a foreign object blocks the pump.E:61-03Error codeWater is not draining; the disposal plug, drain hose, pump cover, or drain-hose high loop may be involved.E:61-60Error codeThe dishwasher has a technical fault.E:90-01Error codeThe supply voltage is too low; Bosch says this is not an appliance fault.E:92-10Error codeThe lower spray arm cannot rotate or is not fitted correctly.E:92-40Error codeThe filters are dirty or blocked.

Model and error-code facts may be shown in the language of the original source.

Official PDF manual

Jump to manual pages

Open the official PDF at pages that document signals for this model.

Source page 40E:20-60Source page 41E:21-30, E:30-00, E:31-00, E:32-00, E:34-00, E:61-02Source page 42E:61-03, E:61-60, E:90-01, E:92-10Source page 43E:92-40

MODEL OVERVIEW

About this model: Bosch SHV9PCM3N

The Bosch SHV9PCM3N is a Benchmark 24-inch dishwasher with a custom-panel-ready front, specified for 16 place settings at 39 dBA. Its listed programs include Heavy, Auto and Normal, with Sanitize and Crystal Dry among the available options. PrecisionWash with the PowerControl spray arm and selectable ZoneControl regions provide its wash setup; Bosch lists CrystalDry for drying.

Fit and installation

The front is designed to take a custom kitchen panel; Bosch says the panel and handle are sold separately. That makes the cabinet-facing appearance an installation choice, while the machine underneath remains the SHV9PCM3N. Bosch gives body dimensions of 33 7/8 x 23 9/16 x 23 1/16 inches, in height-width-depth order, and a required opening of 33 7/8 in x 24 in x 24 in. Measure the opening and consult the installation instructions; the cutout and appliance measurements serve different purposes. Bosch lists a 67-inch power cord. Compare the actual outlet location with the installation guide; cabinet dimensions alone do not establish whether that cord reaches.

Source for this detail · bosch-home.com

Program choices

The named on-machine programs for SHV9PCM3N are Heavy, Auto, Normal, Speed 60, Favorite. The names alone do not fix a run time or prove which program suits a particular load. On this exact listing, Normal is an appliance program while Hand Wash is in the Home Connect-only list. Keep those access routes separate when a household expects a control to be on the physical selector.

Source for this detail · bosch-home.com

Model configuration

Bosch lists SHV9PCM3N as a Benchmark built-in dishwasher with room for 16 place settings and a published 39 dBA sound rating. The model number matters when reading support material: similarly named units can have different door treatments, program menus or indicators. ZoneControl Custom appears in the published option list, whereas Hand Wash is identified with the connected menu. An option can depend on the selected program; the specification alone does not prove every combination is available.

Source for this detail · bosch-home.com

Drying and controls

The listed status cue is TimeLight for SHV9PCM3N; Bosch also records an audible end-of-program signal in the product details. That distinction helps when the controls are hidden along the top edge of the door: a status projection or floor light is a cycle cue, while an error pattern has a different meaning. Home Connect is listed for remote monitoring and control, but app availability does not replace the printed instructions for clearing a physical blockage. Bosch lists Crystal Dry among the controls and CrystalDry, PureDry as the installed drying system. If Normal finishes with water in concave pieces, check the selected drying option and rinse-aid guidance before assuming a defect.

Source for this detail · bosch-home.com

Reading the manual diagnostics

Other manual entries separate draining from filtration and circulation: E:61-03 indicates water is not draining and directs attention to the disposal plug, hose, pump cover or high loop; E:92-40 is about dirty filters; E:92-10 refers to the lower spray arm. E:90-01 concerns low supply voltage and belongs with an electrician, while E:61-60 is a technical fault for Bosch service. For SHV9PCM3N, the code table below carries the manual's page-linked steps; use it before opening any component. A further exact-manual example is E:32-00: it describes a supply-side water inlet problem; verify the valve and hose. This is a different subsystem from the other codes above, so record the complete display before choosing an owner-level check. Compare E:20-60, which concerns limescale on the heating element; the guide calls for descaling; the two entries lead to different checks.

Source for this detail · media3.bsh-group.com · Source page: 40Source for this detail · media3.bsh-group.com · Source page: 41Source for this detail · media3.bsh-group.com · Source page: 42Source for this detail · media3.bsh-group.com · Source page: 43

Verified model details

This description summarizes the linked source documents; check each cited source for your exact model and region.

Manufacturer source

Open official source

Official source linked

Bosch SHV9PCM3N dishwasher product page and manuals

Open official source

If there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.

← Back to all models