MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: GE GDF645SGNBB
The black GE GDF645SGNBB has front controls, Active Flood Protect and a three-digit display. Its linked GE manual identifies LEAK DETECTED as a possible-leak warning that ends the cycle.
The black GDF645 variant
GDF645SGNBB is the black finish of GE's front-control GDF645 platform, with eight touchpads on the visible front edge. The exact product record calls out a three-digit countdown plus separate CLEAN and SANITIZED lights, a Start/Reset pad and control lock. It also lists Active Flood Protect and describes the fitted water leak sensor, rather than leaving that feature to the broad manual's phrase 'on some models'. That combination is the basis for applying the manual's written leak warning to this SKU. The BB suffix has a second practical consequence: the manual treats it as a black painted or coated door, not as the stainless exterior care category. Confirm the full suffix on the machine before following either set of instructions.
A message, a beep and a blinking light
When this machine shows LEAK DETECTED, the manual says the cycle stops and the dishwasher drains. Its troubleshooting table calls the condition a possible leak and tells the owner to contact service; it does not identify the failed joint or prescribe a reset to keep washing. Note the exact message. A beep every minute during operation has a separate explanation: the door may be open, and the manual asks for Start followed by closing the door. A flashing Start status can likewise follow an interrupted cycle. These distinctions matter on a front panel because a light, a sound and a full text message are different pieces of evidence. Do not convert any of them into an invented numeric error code.
Choosing a wash without misreading the timer
GE lists AutoSense, Heavy, Normal, Light and One Hour Wash for GDF645SGNBB. AutoSense is described as responding to soil, while the short wash is intended for lightly soiled items. The product page also specifies Delay Start over a one-to-twelve-hour selection range. A display that counts down during a chosen delay or changes the expected duration after a cycle choice should be interpreted alongside that setting, not labelled a leak fault. CLEAN appears when a completed load is ready; SANITIZED only reports the sanitizing result when its conditions were achieved. The black front panel lets you see these indicators without opening the door, which makes it useful to report precisely which one appeared and when.
Work with the racks and filter
The upper rack is height adjustable and the machine includes four bottle jets, giving owners a way to arrange narrow containers and taller dishes without turning the whole wash into a diagnosis. Upper-only or lower-only wash zones target one occupied rack, as the manual explains, so a deliberately half-loaded wash behaves differently from a full load. GE lists a Piranha hard-food disposer with removable filtration for this exact SKU. The owner manual asks for periodic filter inspection, about every other month according to use, and treats gritty results as a reason to look there. A clogged filter or poorly positioned dishware calls for ordinary cleaning and loading checks; a literal LEAK DETECTED message follows the service route instead.
Drying, sanitation and black-panel care
Dry Boost and the Sani option are both named on the GDF645SGNBB product page, but they answer different needs. The first changes drying behavior; the second concerns a wash that can meet the listed NSF 184 sanitization standard when its conditions are satisfied. The manual also gives an inlet-water range of 120 to 150 degrees Fahrenheit, so water that is too cool or too hot can affect routine results without proving that the leak sensor has operated. For the BB painted door, use a clean, soft, lightly dampened cloth and dry it thoroughly. Keep that exterior-care step separate from the internal flood response. If the display actually says LEAK DETECTED, the manual's instruction is to seek service rather than repeat a cycle to test the finish or drying option.
Verified model details
The black front panel combines a countdown, CLEAN/SANITIZED lights and control lock.
Source for this detailAn actual LEAK DETECTED message differs from an open-door beep or interrupted Start light.
Source for this detail · Source page: 6Delay Start, one-rack zones and a painted-panel care rule shape use of this exact variant.
Source for this detail · Source page: 22
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
GE® Front Control with Stainless Steel Interior Dishwasher with Sanitize Cycle & Dry Boost - GDF645SGNBB - GE Appliances
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.