MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: GE JEM31WF
GE Profile JEM31WF is a white-on-white, one-cubic-foot Spacemaker II with six sensor food programs. Its JEM31 manual explains SENSOR ERROR and normal Popcorn tray pauses.
Identify the one-cubic-foot JEM31WF
The JEM31WF is GE Profile's white-on-white Spacemaker II microwave. Its product listing calls the one-cubic-foot cavity mid-size and gives 800 watts of IEC microwave output. The specified glass turntable is 11.328125 inches across, a useful number when replacing broken glass or measuring a dish. A 27-inch JX827WN built-in kit and an undercabinet hanging kit are optional accessories; the presence of a surrounding cabinet alone does not identify which kit was used. The linked owner's PDF is labeled JEM31 on its cover, while GE's exact-model record establishes the WF finish and accessory references. The manual requires the glass tray and support to stay in position during ordinary cooking. Check their seating before diagnosing uneven heat or a scraping sound.
Interpret its steam-sensor display
GE lists Beverage, Chicken/Fish, Popcorn, Potato, Reheat and Vegetables sensor choices for this exact WF model. They use humidity, so dry the dish exterior and the oven cavity before starting, and leave a vent in a microwave-safe covering. The Popcorn page narrows the package size to 3.0 through 3.5 ounces. Opening the door while POPCORN appears causes SENSOR ERROR; the manual says to close the door, use CLEAR/OFF and begin again. The troubleshooting table has another cause: steam was not detected by the maximum allowed time. In that case Time Cook is advised for more heat. These are different paths behind one display message. Select the response from what happened during the actual cycle rather than repeatedly launching a sensor program.
Set portions for vegetables and leftovers
This sensor panel has food-specific limits beyond popcorn. The manual describes Reheat for a single portion of previously cooked food; a whole casserole is a different load, better handled by a measured Time Cook interval and stirring. For fresh vegetables, the printed table gives 4 to 16 ounces and one quarter cup of water per serving. That water helps make the steam the sensor expects, whereas excess moisture outside the vessel can confuse it. GE's exact product page confirms Vegetables and Chicken/Fish on JEM31WF, so those food tables apply to its selectable controls rather than being merely generic pages in a shared manual. A dense potato or a thick fish portion may need a standing period after heat for temperature to equalize. Check the food, not the countdown alone.
Plan timed work and defrosting
Outside the sensors, JEM31WF has Auto and Time Defrost, Time Cook I and II, Delay Start and a 24-hour reminder according to its product entry. Auto Defrost is described for meat, poultry and fish up to six pounds; enter the actual weight and turn the food when prompted so a frozen edge does not remain hidden. Time Defrost offers direct control when a food does not match the automatic categories. Delay Start shows DS on the display while waiting. It is a scheduled cooking selection, so choose it only for food that can safely remain in the appliance until the start time. A reminder is an alert rather than a heating program. Understanding the distinction helps explain a clock that appears active while the magnetron is not yet running.
Check turntable movement and locked controls
The manual notes that the JEM31 turntable rotates, stops and rotates again during Popcorn. This is deliberate and different from a tray that has become dislodged or a program showing SENSOR ERROR. The WF listing also confirms a Turntable On/Off control for a large dish; leave the tray and support installed even when rotation is disabled. If the panel ignores a command, inspect the Child Lock state before assuming failed electronics. Holding CLEAR/OFF for about three seconds changes the lock state, as the family manual explains. An early opened sensor cycle, absent steam, a locked panel and an intentional tray pause have separate explanations. Read the displayed text, note which program was running and test a suitable timed cycle after checking the door and tray.
Verified model details
The exact one-cubic-foot 800 W model offers six sensor food selections and optional installation kits.
Source for this detail · Source page: 1SENSOR ERROR separates an opened door before steam detection from steam never arriving in time.
Source for this detail · Source page: 32Delay Start, turntable control and Auto Defrost give this variant distinct non-sensor choices.
Source for this detail · Source page: 24
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
GE Profile Spacemaker II® Microwave Oven - JEM31WF - GE Appliances
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.