Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: GE JGS968THWW
JGS968THWW is a true-white GE Profile slide-in gas range with glass-touch controls, convection bake/roast, food probe, proof mode, self-clean and an F-plus-character function alert.
Identify the white slide-in panel
JGS968THWW is the True White GE Profile 30-inch slide-in gas range named by the exact product page. Its cooktop is glass ceramic with sealed burners under continuous heavy-cast grates, and the oven uses a Glass Touch QuickSet III control with numeric display. The linked owner's PDF cover names JGS968 together with PGS968; it is a shared guide, so the exact product listing determines the finish and equipment of THWW. The page 10 panel drawing visibly includes convection bake and roast, PROBE and PROOF. That layout is more capable than the knob-and-timer gas ranges elsewhere in this catalog. A surface burner flame and a keyboard display are different parts of the same range, so record which was affected. For a control, grate or door part, quote the full JGS968THWW and not only the family prefix. The all-white appearance is also useful when distinguishing it from stainless or bisque relatives with similar printed manuals.
Use convection and the food probe
The exact GE list specifies Convection Bake, Convection Roast and three heavy-duty racks. Page 18 says the circulating fan distributes hot air around food and may cycle on and off; it stops when the oven door opens. On multiple racks, the guide offers rack positions D, E and F or B, D and F if pans need more room. Auto Recipe Conversion reduces a conventional baking setting by the recommended 25 degrees Fahrenheit, so a lower displayed temperature during convection can be an intended conversion rather than a malfunction. The food probe is another actual feature, confirmed by GE. Page 17 directs inserting it into food and connecting it securely inside the cavity, then setting the desired internal temperature before BAKE and START. At that target, probe and oven shut off and signal. The probe's display behavior is not an F diagnostic. Note whether it was attached when assessing a roast that stopped earlier than expected.
Separate dough proofing from warming
PROOF has a narrower job than the ordinary WARM function. Physical page 23 describes a controlled environment for covered yeast dough on shelf B or C, selected with PROOF and START. The display says PrF, and the oven light stays on during the cycle. The temperature is automatic, not adjusted with the numeric keypad. A hot oven above 125 degrees Fahrenheit refuses proofing and shows HOT; that status is a condition to wait out, not a failed board code. The same page warns against using proof mode to hold cooked food hot because it is too cool for that purpose; WARM serves the distinct food-holding use. This exact model also has self-cleaning, whose locked door may remain closed until the cavity cools. These ordinary messages can occupy the screen in different modes. Write down the selected function and door condition before grouping PrF, HOT, LOCKED and F into one vague complaint.
Handle the documented F function error
The visual diagnostic evidence is the troubleshooting table on physical PDF page 40. It labels F followed by a number or letter flashing on the display as a function error. Press CLEAR/OFF and resume operation. If the code repeats, disconnect all power to the range for at least thirty seconds, reconnect and contact service if it returns again. The table does not say that one particular suffix means a probe, fan or gas valve has failed. It separately covers a flashing LOCKED message when self-clean was selected with the door open and a steady lock light while the oven remains too hot to open. Those are not suffixes of F. Tell service the exact JGS968THWW, full characters, convection or standard mode, probe connection and recent cleaning state. An F during ordinary baking can occur without the proofing HOT condition; do not infer a component from the simultaneous presence of a specialized function.
Verified model details
The exact GE listing supports convection, probe and proof on this white JGS968 variant.
Source for this detail · Source page: 1PrF and HOT are proofing status messages, while F-plus-character is the documented fault pattern.
Source for this detail · Source page: 40A repeating F calls for CLEAR/OFF then at least thirty seconds without power before service.
Source for this detail · Source page: 23
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
GE Profile™ 30" Slide-In Gas Range - JGS968THWW - GE Appliances
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.