MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: GE PH80S10BNY
GE Profile GeoSpring PH80S10BNY is an 80-gallon, 240-V smart hybrid heat-pump water heater. GE lists its cabinet at 76.375 × 27 × 27 in. (H × W × D), useful measurements to check before installation. Its control offers Heat Pump, Hybrid, High Demand, Standard Electric and Vacation modes, which balance energy use and hot-water recovery; for day-to-day upkeep, the manual calls for cleaning three air filters when the Filter indicator illuminates and keeping the condensate drain clear.
Exact model and cabinet
PH80S10BNY is GE's 80-gallon GeoSpring heat-pump model marketed for 240 V without FlexCapacity. PH80S10BNY is rated by GE to deliver 101 gallons in the first hour on a 240/208-V, 30-A supply. At 76.375 inches tall and 27 inches wide, it also requires careful planning for transport and service access. GE publishes the same 101-gallon first-hour number for PH80S10BPY, yet that BPY model adds an electronic mixing valve absent from this BNY product sheet. Equal first-hour ratings therefore do not mean equal outlet controls or identical fault-code explanations. The BNY's non-FlexCapacity F17 interpretation is a practical example of why the last letters of the model matter more than a family photograph.
Configuration without FlexCapacity
The PH80S10BNY is a non-FlexCapacity version, so the manual's Normal, High and X-High mixing-valve selections must not be assumed to exist here. GE still lists the heat-pump operating modes for this heater. A key diagnostic difference is that F17 on this non-mixing-valve configuration refers to a possible missing jumper wire, whereas the FlexCapacity table associates that number with an outlet safety cutoff. Exact model identification therefore changes the explanation of a displayed fault, not just the product description.
Heating modes
For a household deciding how to run PH80S10BNY, the manual's mode descriptions are more useful than an efficiency slogan. The available choices include Heat Pump, Hybrid, High Demand, Standard Electric and Vacation. Hybrid is the normal mixed strategy; High Demand brings in the heating elements more readily for recovery, whereas Heat Pump emphasizes compressor operation. Vacation is intended for periods away rather than ordinary heavy use. Check both the selected mode and the water-temperature setting when evaluating output; changing a mode does not repair a fault code.
Temperature decisions
Tank size alone does not remove the need to manage outlet temperature. For PH80S10BNY, the manual places scald warnings next to the operating instructions and explains the role of the temperature setting. Higher settings may affect usable hot water, but they also increase burn risk, so the choice must take the people using the taps into account. Distinguish a temperature preference from a heating fault: an F-code on the display calls for its own manual entry, even if the water feels cooler than expected.
Filters and tank care
The care instructions for PH80S10BNY address more than the water tank. Airflow through the three filters matters to the heat-pump side, and condensate must leave through the specified drain. GE notes that a dirty-filter alert can cause a change in operating behavior, while a blocked condensate drain can interrupt heat-pump use until the path is cleared. The manual also discusses the sacrificial anode, which protects the tank; inspection or replacement belongs to qualified service. These are distinct maintenance issues with different signs.
Interpreting fault codes
The PH80S10BNY manual lists temperature and protection faults separately. F30/F31 concern tank sensors; F34 through F37 relate to evaporator, compressor-outlet or ambient sensing, while F41 can involve the sensing anode or an empty tank. F43 reports water near the heater through the leak-detect module. These codes point to different subsystems and different service paths. An alert is not a reason to bypass a sensor or open electrical covers; record the code, check the manual's owner-level instructions and arrange qualified service where directed.
Verified model details
80-gallon, 240-V smart hybrid heat-pump water heater.
Source for this detailCabinet dimensions: 76.375 × 27 × 27 in. (H × W × D).
Source for this detailHeat Pump, Hybrid, High Demand, Standard Electric and Vacation modes.
Source for this detail · Source page: 8For day-to-day upkeep, the manual calls for cleaning three air filters when the Filter indicator illuminates and keeping the condensate drain clear.
Source for this detail · Source page: 13
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
GE PH80S10BNY product support and owner manual
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.