MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: Midea MDC17P0ABB
MDC17P0ABB has a five-liter tank, separate Air Refresh option and three documented display errors.
Size the black-panel countertop unit
MDC17P0ABB is the 17-inch portable Midea unit with a black control panel and a five-liter built-in tank. Its exact product listing says it accepts two place settings, over thirty individual items and dishes up to 9.5 inches across, though the basket must still allow the spray arms to turn. The body is listed as 17.1 inches wide, 16.5 deep and 17.2 high, with a 62 dBA sound rating. Midea includes a quick-connect inlet hose with faucet adapter as well as a drain hose and water pitcher. This permits a choice of manual tank filling or a compatible tap connection; it does not make the drain optional. Plan a stable counter position with room for an open door and a restrained hose before filling it. Those dimensions and accessories identify this SKU, rather than every similarly named compact model.
Understand programs and the tank symbol
The manufacturer groups five wash cycles with one separate drying setting on the product page. On the owner panel, C1 means Hygiene, C2 Glass and C3 Fruit; Normal and Rapid have their own buttons. Air Refresh is described as fresh-air circulation for drying and odor control, and the manual says it is on by default unless switched off. The Fruit cycle has a special instruction in the wash table: use manually added cold water rather than the automatic faucet mode. Normal is listed at 130 minutes, while Rapid is listed at 40; these program durations help distinguish a long normal load from a short lightly soiled one. A lit faucet icon on the display means the internal tank is low and needs filling. It is an indicator, separate from the E-prefixed faults. The delay control can schedule a start from one to twenty-four hours later.
Use detergent and pauses as documented
The MDC17P0ABB manual makes an unusually clear detergent distinction: this model does not support rinse aid, so add only suitable dishwasher detergent in the detergent cup. Do not copy rinse-aid advice from another Midea appliance just because it also has a compact basket. A paused cycle has its own procedure. If the door opens during washing, the unit pauses; after closing it and pressing Start/Cancel, the guide says washing resumes after about ten seconds. A forgotten plate can be added during the first ten minutes, but open the door slightly first and wait until the spray arms stop before opening it fully. Later in a cycle, detergent may already have been dispensed and water drained, so changing programs is not equivalent to simply adding an item. These steps matter when diagnosing a machine that appears to have stopped after someone opened its door.
Drain and maintain before moving
The exact owner cover identifies MDC17P0ABB, and its care instructions include a tank-drain command specific enough to keep beside the appliance. In standby, hold Normal and Rapid together for three seconds to empty the internal tank. The freezing and moving sections use that action before disconnecting hoses; they also call for catching remaining water and drying the sump with a sponge after removing the bottom filter. The filter itself catches food particles and should be rinsed regularly, then fully reinstalled before operation. Midea warns that running without filters can reduce performance or damage dishes. These are practical checks for a portable machine that may be stored or relocated between uses. They should not be replaced by assuming every puddle or weak wash is an electronic fault.
Separate water alerts from three faults
The rendered error table on PDF page 29 shows only E1, E3 and E4 for this model. E1 means insufficient incoming water. Check that the tap connection is properly attached and open, or that the five-liter tank is filled, as the table directs. E3 reports failure to reach the required temperature; the manual sends this to customer service for qualified repair. E4 indicates overflow and also calls for qualified help. Its warning says to shut off the main water supply before making that call and to clear water from the base pan before restarting. Record the exact displayed characters and whether the water-faucet icon was lit too. The low-tank icon, a program C number and an E code represent different conditions on this control panel; treating them as interchangeable would lead to the wrong first action.
Verified model details
Five-liter tank and 17.1-inch body
Source for this detailFive wash programs plus Air Refresh
Source for this detailNo rinse-aid dispenser and a forced-drain shortcut
Source for this detailE1, E3 and E4 verified on owner page 29
Source for this detail
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
Midea Portable Countertop 17-Inch Dishwasher
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.