MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: Midea MDT24P4AST
MDT24P4AST uses four front LEDs for progress and three documented fault patterns, while its drying options and connected cycle have separate rules.
Identify the 24-inch pocket-handle dishwasher
Midea's exact MDT24P4AST listing describes a top-control dishwasher with a pocket handle, stainless-steel tub and 14-place-setting capacity. It specifies a 45 dBA sound level, a third rack, adjustable-height upper rack and modular utensil basket. These details help separate it from another 24-inch model that happens to use the same brand name. The owner PDF itself prints MDT24P4AST on the cover and gives the same place-setting class. Measure the installation opening and verify the complete model suffix on the appliance before using this code page. The product also advertises Extended Dry with a dual-fan heating arrangement, but a drying complaint is not automatically one of the three fault patterns in the manual. Start with the exact cycle and option that were actually selected.
Choose cycles and drying options deliberately
The controls sit along the top edge and are operated with the door open. Six named cycles appear in the product specifications: Auto, Heavy, Normal, Quick, Rinse and My Wash. The manual says My Wash needs parameters set in the MSmart app and uploaded over Wi-Fi before that cycle becomes available. Heated Dry and Extended Dry cannot be selected together; Extended Dry lengthens heater and fan operation. For a normal load, rack position, spray-arm clearance and the chosen cycle matter as much as the button pressed. The loading chapter asks that dishes avoid stacking or overlapping and that large pans and handles not block either spray arm. Before concluding the dryer has failed, check whether the load can drain freely and whether the chosen option is compatible with its cycle.
Read the front lights and ordinary sounds
The four LEDs across the front report Power On, Wash, Rinse, Dry and Completed states by their position and flash behavior. The exact product page calls this a cycle progress indicator. A completed-cycle beep is normal, whereas the troubleshooting chapter says a rapid beep can indicate an error condition. After pressing Start, the manual directs the user to close the door within four seconds; opening the door to pause a running cycle should be done slowly until spraying stops. These everyday states should be identified before looking at the three fault labels. On page 41, E1, E4 and Ed are paired with drawings of LED patterns, not merely a generic list of characters. Note which lights blink or remain steady, as well as the sound and cycle stage, when reporting a problem.
Respond to water-flow and overflow patterns
E1 means the dishwasher did not get enough water flow in the allotted time. The manual advises checking that water is turned on and verifying supply pressure; it specifies 20 to 80 psi for sufficient flow. This is a supply-side check, not an instruction to replace the flow meter. E4 instead means the overflow or leak sensor has activated because water is excessive or there is a leak. Turn off water to the dishwasher first. The page then points to checking the filter system for blockage and warns that broken glass may be hidden there. If there is no water in the tub, Midea directs the owner to Customer Service. Keep the two patterns separate: opening a supply valve for E4 could worsen a leak.
Treat Ed as a communication problem
Ed is printed with a lowercase d and represents a communication exception between the display board and the main control board. The diagnostic page says it can arise after the display fails to receive or the main board fails to send a signal for more than twenty seconds, and its remedy is to contact Customer Service. Do not open the door panel or probe the boards as a household troubleshooting step. The safety chapter recommends knowing how to shut off incoming water and power; that is particularly useful when water is present near an electrical appliance. Record MDT24P4AST, the exact LED pattern, whether the beep was rapid, the selected wash cycle and any visible water. Such observations allow a service technician to distinguish Ed from the normal cycle-progress lights without guessing from a similar model's code list.
Verified model details
Exact 24-inch 45 dBA built-in model
Source for this detailDistinct top controls and loading features
Source for this detailE1, E4 and Ed LED patterns from page 41
Source for this detailOwner checks separated from service work
Source for this detail
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
Midea 24" Top Control Smart Dishwasher with Extended Dry MDT24P4AST
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.