MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: Midea MRF23I5AST
Midea MRF23I5AST: twelve verified refrigerator fault codes, inside controls and automatic icemaker context.
A three-door model with its own code table
MRF23I5AST is Midea's stainless, counter-depth French-door refrigerator with two fresh-food doors and a lower freezer drawer. The product page markets it as a 23 cubic foot model, while its exact specification and owner guide give the more precise storage volume of 22.6 cubic feet: 15.5 for the refrigerator and 7.2 for the freezer on the current product sheet. It is about 32.9 inches wide, which explains the manufacturer's emphasis on a relatively slim kitchen opening. The built-in icemaker deposits cubes in an interior box; there is no external water dispenser on this SKU. The model is advertised as garage ready over an external temperature range of 38–110°F, with SmartHome connectivity, LED lighting and automatic defrost. Those details help identify the right appliance before interpreting a display. The rendered owner cover prints MRF23I5AST, and the manufacturer's product-documentation feed links that exact PDF and an exact-model specification.
What installation and first ice making involve
The owner guide calls for freestanding installation on a flat, sturdy floor with ventilation around the cabinet. Its clearance diagram gives more than 2 inches behind, more than 1 inch above and more than 1/8 inch on the sides, with extra side clearance when placed against a wall so the doors can open. The appliance needs a dedicated, grounded 115 V, 60 Hz, 15- or 20-amp circuit. For the internal icemaker, the cold potable-water line must deliver between 276 and 689 kPa; after connection the guide tells owners to turn the valve on and check for leaks. The icemaker is on by default at power-up, but ice does not begin until the freezer has cooled. The manual says the first cubes typically take about eight hours. Later cycles are about 100 minutes under the stated 21°C test conditions. An empty box shortly after installation is therefore a different observation from the EE or EP fault code.
Locate the controls and interpret ordinary modes
Unlike an exterior water-and-ice panel, this model's control panel is inside the refrigerator at the lower right. At initial power-up it sets the refrigerator to 4°C and freezer to −18°C. With no fault, the display shows the refrigerator set temperature; with a fault it cycles the code. After ten seconds with the door closed and no button press, the screen locks, and after thirty seconds it dims. A button wakes it, but ordinary operations require the unlocked state. The refrigerator set range is 1–7°C and freezer set range is −22 to −14°C. Super Cool temporarily sets 1°C and normally exits after six hours; Super Freeze sets −22°C and normally exits after forty hours. Sabbath mode suppresses light, display and buzzer and has its own four-second control sequence. These are normal operating modes, not fault codes. Before reporting a problem, record whether the display shows a temperature, mode icon or repeating letters.
Sensor and board messages on page 13
The exact owner's fault table identifies E1 as the refrigerator temperature sensor, E2 as the freezer temperature sensor and E5 as the freezer defrost sensor. E6 is communication between the display board and main control board; E7 identifies the ambient temperature sensor. EH has a specific meaning here: the humidity sensor. That matters because the same letters can have a less precise description in another Midea manual; use this model's table rather than importing a definition from a neighboring refrigerator. The guide notes that refrigeration and freezing may still operate while a listed fault is present, but asks the user to contact a maintenance specialist to ensure normal use. Record the exact code and observe both compartments without assuming which replacement part will fix it. A temperature setpoint that flashes during normal adjustment should not be relabeled E1 or E2, and an E6 communication message is not the same as a lost SmartHome connection.
Ice and fan faults are separate groups
EE names the icemaker bottom sensor, while EP indicates an icemaker fault. Neither is the generic “not making ice” symptom in the later troubleshooting table. The four L codes are another group: L3 is a cooling-fan fault, L4 abnormal cooling-fan speed, L5 a condenser-fan fault and L6 abnormal condenser-fan speed. The table does not turn these into owner repair instructions. If one remains visible, follow the guide's service recommendation and preserve the letters in a photograph. For an ice complaint with no displayed code, check the different questions in the manual: whether the icemaker was switched on, whether the water supply is open, whether the line is kinked, whether its connection is correct and whether low pressure or a clogged filter is involved. The guide separately says normal No Frost fan operation can make a rushing sound. A noise by itself, without a code or cooling symptom, is not proof of an L3–L6 fault.
Distinguish service calls from routine care
The manufacturer gives a separate general troubleshooting list for power loss, odor, a long compressor run, an unlit lamp, door closure, loud noise and lack of ice. It suggests checks such as the outlet, packaging blocking a door, floor level and water supply before service if no issue is resolved. The guide's care pages call for checking door gaskets, clearing dust from the back at least yearly and cleaning the interior and removable ice box; it also warns against sharp tools for removing frost. This model has automatic defrost, so frost care should follow those instructions. For a persistent code, tell the service provider the exact MRF23I5AST reference, the displayed characters, whether food temperatures are affected and whether the ice box is filling. The current product specification lists a two-year limited parts-and-labor warranty. Keep proof of purchase and the exact model label with the service notes; a general symptom and a tabled fault are different evidence.
Verified model details
22.6 cu ft three-door, counter-depth model with interior icemaker.
Source for this detailE1/E2/E5/E7/EH name specific sensors; E6 is board communication.
Source for this detail · Source page: 11EE/EP relate to ice making, while L3–L6 distinguish cooling and condenser fans.
Source for this detail · Source page: 13
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
Midea 23 cu. ft. Garage Ready French Door Refrigerator with Icemaker — MRF23I5AST
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.