MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: Midea MRV115B4AST
MRV115B4AST is a compact 115-can cooler with two verified display faults and a separate FC operating mode.
Identify the 115-can beverage cooler
The exact Canadian Midea product page calls MRV115B4AST a 3.2-cubic-foot, 18.5-inch freestanding beverage cooler in stainless steel. It advertises storage for 115 standard cans, a reversible glass door, LED lighting, adjustable shelves and electronic temperature control. The glass is described as three-layer, double-paned and Low-E with UV protection. The manufacturer-linked PDF shows MRV115B4AST visibly on its cover, although its embedded cover font decodes into invalid characters when text is extracted. We verified the rendered page and its file hash rather than guessing from the filename. This matters because the same document also prints a separate 48-can arrangement diagram. Follow the exact product's 115-can identity, and compare the model on the rating label before applying E1 or E6. The web URL's old wine-cellar wording does not turn this listed single-control beverage cabinet into a two-zone wine refrigerator.
Arrange cans without blocking cooling
The manual asks for more than 100 millimetres of open space from adjacent walls and a stable position before use. After transport it says to let the cabinet stand over two hours before power is applied, reducing the chance of a cooling problem. Its 115-can drawing assumes standard 355-millilitre cans; larger containers or a different shelf pattern lower the actual count. Cans should not touch the back of the chamber because airflow must reach the shelves. The guide also notes that the upper area can be warmer than the lower area due to internal air circulation. None of these ordinary differences proves a temperature-sensor failure. If you reverse the door, keep the glass supported, exchange hinges as described and check the gasket's seal afterward. A poorly sealed door can mimic weak cooling without an electronic fault.
Read the touch panel and normal FC mode
The door's touch panel includes standby, lighting, temperature-up and temperature-down keys plus the display. On first power-up the panel lights for three seconds and sounds a tone; normal operation then shows the set temperature. Holding standby for three seconds turns the cabinet to standby and blanks the screen. Pressing the lighting key controls the interior lamp. The operating guide describes a 1 to 10°C setting range, matching the product page. Holding standby and lighting together for three seconds invokes Super Cool and displays FC. That is a deliberate operating state, lasting no more than 24 hours, not an E-series failure. The unit can restore its prior setting after a power loss. Record the exact characters shown before unplugging; a dark standby screen or FC needs a different response from a persistent E1.
Interpret the two actual error codes
The rendered table on physical PDF page 10 prints only two fault entries for this model's linked manual. E1 is a temperature sensor fault. E6 is a communication fault, but the table does not identify a particular board, cable or display module for replacement. Both faults are distinct from the FC mode printed just above them. Midea tells the user to contact a maintenance specialist when a fault code appears so the cooler can return to normal use. Note how long E1 or E6 has appeared, the set temperature, whether the cabinet still chills and whether the door seals. Photograph the display before any power interruption. A warm cabinet alone could be caused by a large fresh load, repeated door openings or poor ventilation; it does not allow one to infer E1 without the displayed code.
Clean and troubleshoot within the owner boundary
Disconnect power before cleaning the shelves, interior or door gasket. The guide recommends a soft cloth, diluted mild detergent for the seal and a gentle baking-soda solution inside; do not scratch glass or flood electrical parts. It says to wait at least five minutes before connecting power again after interruption to protect the compressor. For no operation, the troubleshooting table checks the plug and household circuit. Longer compressor runs can accompany summer heat, heavy loading and frequent door opening; ordinary sidewall warmth or exterior condensation may also occur. Remove dust behind the cabinet and check the gasket before seeking help. If E1 or E6 persists after basic checks, give service the exact MRV115B4AST suffix, photograph, set point, loading and ambient conditions. Do not open the control board or refrigerant circuit to guess at a component.
Verified model details
Exact Canadian 3.2-cu.-ft. beverage cabinet
Source for this detailCan arrangement and door clearance
Source for this detailE1 and E6 verified on PDF page 10
Source for this detailFC cooling mode and routine owner checks
Source for this detail
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
3.2 Cu. Ft. 18.5” Freestanding Beverage Cooler MRV115B4AST
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.