MODEL PROFILE
Signal or code
Error codes and display signals
The official manual linked for this model documents these messages. Some indicators apply only to variants that display them; each entry is labeled as a code, indicator, or status.
No matching signal for this model.
Model and error-code facts may be shown in the language of the original source.
Official PDF manual
Jump to manual pages
Open the official PDF at pages that document signals for this model.
MODEL OVERVIEW
About this model: Samsung WF53BB8700ATUS
Samsung Canada's support record identifies WF53BB8700ATUS as a Bespoke ultra-capacity washer with Super Speed and AI Smart Dial.
Locate the WF53 variant within a shared Bespoke manual
Samsung Canada's support record identifies WF53BB8700ATUS as a Bespoke ultra-capacity washer with Super Speed and AI Smart Dial. It advertises 6.1 cubic feet. The linked owner's PDF covers both WF53BB87**A* and the smaller WF46BB67**A* family, so a statement printed for one column must not automatically be applied to the other. On physical page 68 the WF53 column lists 5.3 cubic feet and a 900-watt heating rating, while the WF46 column lists 4.6 cubic feet. The support heading and the owner's variant column use different capacity figures; the sources do not explain the measurement convention, and the two numbers should remain attributed to their own contexts. Page 44 explicitly labels Drum Light as a feature only of WF53BB87**A* models. This is a useful way to confirm that a shared document can still contain details specific to WF53BB8700ATUS. Always match the full support model before reading its code section.
Distinguish a screen message from a short fault code
This Simple UX manual presents some faults as plain-language messages on physical page 64 and others as compact codes on page 65. A message such as “Check drainage” tells the owner to consider the drain path, while “Check water supply” points to the inlet side. “Check water lines” further calls for reviewing the hot and cold hoses. “Unbalanced laundry detected” concerns distribution of the load, and “Door is open” asks for the door to be shut before continuing. These phrases are diagnostic signals even though they are not two-character codes. Record the actual wording as displayed instead of converting it to a code seen on another Samsung washer. The AI Smart Dial and connected features do not change the meaning of the owner's printed fault table. A phone notification may be helpful, but the appliance display and the exact model manual remain the primary references for first checks.
Map the compact codes to their own subsystems
Page 65 then lists OC for overflow, LC and LC1 for drain-hose checks, 3C for the motor, HC for the washing heater, 1C for the water-level sensor, AC and AC6 for communication, and DC1 for the main door lock. The owner does not describe these as interchangeable. For OC, Samsung says to restart after spinning and contact a service centre if the code remains. HC is relevant to this WF53 variant because its page-68 specification includes a heater. A DC1 lock problem is different from the plain “Door is open” message on the previous page. Likewise, a drainage message can arise before a different information code; the exact text helps decide which accessible path to inspect. Preserve all letters and digits when requesting help. The owner's table gives some limited checks and sends persistent or serious faults to a Samsung service centre.
Use WF53-only controls without confusing them with diagnostics
The Drum Light instruction explicitly mentions WF53BB87**A* and therefore applies to the WF53 family represented by this support page. It is a convenience control, not evidence that the washer has a fault when the light is off. The manual also explains Child Lock, Delay End, cycle selection, and connected settings for this Simple UX platform. Before treating a stopped programme as an error, check whether the appliance is paused, its door is locked for safety, or a selected option is changing the expected sequence. Super Speed is an advertised feature, but the duration of an actual wash depends on the load and selected cycle. Keep the high-capacity model's loading guidance in mind: an uneven pile of large articles can produce the unbalanced-laundry message even when the motor is sound. The printed WF53 specification is a better guide to this unit's heater and capacity than the WF46 column beside it.
Keep the source and the observed symptom together
When a fault appears, note WF53BB8700ATUS, the full screen phrase or code, the cycle phase, and whether water remains in the drum. Inspect accessible items such as supply taps, hose connections or a drain obstruction only as the matching message instructs. Do not open electrical panels to investigate AC or AC6 communication faults. If the door stays shut, follow the manual's water and safety guidance rather than forcing the lock. Samsung's code pages distinguish owner checks from service requests; use the action printed for the exact row and seek help if the signal returns. The official support link identifies the current owner PDF, while private source verification confirms the diagnostic pages and WF53-specific column. Keeping those two pieces together prevents a generic WF46 article from being mistaken for this larger Bespoke machine.
Verified model details
Locate the WF53 variant within a shared Bespoke manual
Source for this detailDistinguish a screen message from a short fault code
Source for this detailMap the compact codes to their own subsystems
Source for this detailUse WF53-only controls without confusing them with diagnostics
Source for this detailKeep the source and the observed symptom together
Source for this detail
This description summarizes the linked source documents; check each cited source for your exact model and region.
Manufacturer source
Open official source
Bespoke 6.1 cu. ft. Ultra Capacity Washer with Super Speed and AI Smart Dial | Samsung Support CA
Open official sourceIf there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.